English

Log in or Register Your cart
 

Product successfully added to your shopping cart

Total products (tax incl.)
Total shipping (tax excl.) Free shipping!
Tax €0.00
Total (tax incl.)
Continue shopping Proceed to checkout
Pause
Play
Please note that our office will be closed during the holidays from 14th of July till 27th of July. ALL SHIPMENT WILL BE CONTINUED NORMALLY! WARNING!!! FOR ALL MARS USERS - CHECK YOUR MARS IN MARS BULLETIN!!! SIGMA TANDEM SYSTEM - 370 DELIVERY JUST IN 48 HOURS!!! - OTHER SIZE IN 2 WEEKS!!! LARSEN & BRUSGAARD - PROTRACK (old pice: €279.72 new price: €199)
Home > Rigging equipment

Rigging equipment

Grid List
Quick view

Heavy Duty Heat Cutter - 230V / 60W

Heavy Duty Heat Cutter - 230V / 60W

Handoperated tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic fabric, such as cords, ropes, bands and belting fabric. 

€220.10
Quick view

Rigger bag

Rigger bag

Rigger bag. Measurements: 35x45x15cm.

€159.18
Quick view

Rigging Nippers

Rigging Nippers

Small handy scissors especially for rigging jobs. A built in spring reopens the scissors after every cut.

€28.97
Quick view

Wire Rope Shears forged

Wire Rope Shears forged

Wire Rope Shears forged head polished, handles with non-slip plastic coating.

€52.29
Quick view

Seal Press

Seal Press

Important accessory for all packers and riggers. Necessary to press seals on safety threads after the finished reserve pack job. Sturdy and durable pliers for the common lead seals. Made in Germany. Length: 11cm

€47.05
Quick view

Straight hemostat 5"

Straight hemostat 5"

Ideal instruments for compressing material, pulling threads and getting into very tight spots. Built in locking mechanism. Stainless steel.

€14.92
Quick view

Line holder

Line holder

Used to hold lines in proper position while pleating canopy.

€13.64
Quick view

Line holder - black

Line holder - black

Used to hold lines in proper position while pleating canopy.

€10.78
Quick view

Stainless steel fid

Stainless steel fid

These fids are made from stainless steel. Each fid is about 3 1/4" long and the set has one 2.25mm in diameter, one 3.5mm in diameter, and one 4.5mm in diameter fid. One of these fids will finger trap any of the hollow braided suspension lines currently on the market.

€45.82
Quick view

Cypres Finger Trapping Fid

Cypres Finger Trapping Fid

Special finger trapping fid for Cypres loop material and indispensable for every rigger. Is used to make Cypres closing loops.

€3.16
Quick view

Finger Trapping Fid Set

Finger Trapping Fid Set

Indispensable to make finger traps in suspension lines. The set contains 3 different sizes.

€15.46
Quick view

Sewing Palm

Sewing Palm

A leather tool used to hand-sew harness and other heavy material. Right hand.

€24.92
Quick view

Seam Riper

Seam Riper

For fast but careful removal of seams. Is part of the basic equipment of riggers.

€3.33
Quick view

Beeswax

Beeswax

A must for all jumpers and riggers. Beeswax is normally worked into control lines where they rub together to keep them from burning. Also used in sewing to treat thread for easier sewing and less slippage.

€4.25
Quick view

T-Bodkin Expert

T-Bodkin Expert

The T-Bodkins expert version consists of 3 threaded parts. The bodkin can be extended from 10 to 30 inches with an intermediate rod and this way can also be used for jobs through the reserve pilot-chute to the loop. It is made from high quality steel as well.

€40.81
Quick view

T-Bodkin - threaded

T-Bodkin - threaded

Especially useful and indispensable reserve packing tool for closing the reserve container. The T-Bodkin (also called T-bar) is made from high quality steel and consists of two components: T-handle and bodkin. Overall length is 8 inches. For some containers 2 bodkins are necessary.

€20.57
Quick view

T-Bodkin

T-Bodkin

Especially useful and indispensable reserve packing tool for closing the reserve container. The T-Bodkin (also called T-bar) is made from high quality steel and consists of two components: T-handle and bodkin. Overall length is 8 inches. For some containers 2 bodkins are necessary.

€24.49
Quick view

Positive Leverage Closing Device (18cm)

Positive Leverage Closing Device (18cm)

This closing aid is a substantial relief for the reserve packer. The device reduces significantly the pull force to close the container, thus packing small and tight containers becomes a one man job. By simply turning the loop is pulled through the grommets till the pin can be inserted.

€28.57
Quick view

Positive Leaverage Closing Device (40cm)

Positive Leaverage Closing Device (40cm)

This closing aid is a substantial relief for the reserve packer. The device reduces significantly the pull force to close the container, thus packing small and tight containers becomes a one man job. By simply turning the loop is pulled through the grommets till the pin can be inserted.

€32.00
Quick view

Ultimate closing device

Ultimate closing device

The Rigger's new best friend, and most versatile closing device available. This device can help shorten the time to close a reserve container over the traditional type of positive leverage closing device. This is a variation on the Positive Leverage Closing Device or T-Bar. This positive leverage closing device is machined from a 1" bar of

€79.81
Quick view

Packing Pin with Flag

Packing Pin with Flag

Used for temporarily hold pack closed prior to inserting of actual ripcord. Extra long cable length with warning flag installed.

€5.79
Quick view

Cypres Packer Kit

Cypres Packer Kit

Every rigger should own this kit. It contains all important parts needed to pack reserve containers equipped with Cypres loops. The used loop material can not only be used for Cypres equipped rigs, but is suitable outstandingly for closing all reserve containers, because the necessary pull force at the Ripcord handle is reduced by up to 50% and the

€62.36
Quick view

Locking pull-up cord

Locking pull-up cord

Used to control thickness of free bag between upper and lower grommets of one-pin reserves.

€4.86
Quick view

Molar Strap

Molar Strap

So the canopy gets into the freebag the way it should come out. Every rigger needs this important and very popular packing aid to ensure the shape of the laid down pack job stays the same while inserting into the freebag.

€9.93
Quick view

Square reserve tension device

Square reserve tension device

Fabricated of steel and cadmium plated. Built to accept rapid links without turning them 90 degrees.

€47.68
Quick view

Pull check tool

Pull check tool

By inserting the hook in the size 0 grommet of the reserve container, and the ripcord cable in the slot of the pull check tool, you can check the pull force of the reserve ripcord without opening the container. This device does not work on the top pin of some pilot rigs where the angle of the pull is extreme.

€39.10
Quick view

Wood Packing Stick

Wood Packing Stick

Standard equipment for every packer. Length app. 30cm.

€6.12
Quick view

Closing Plate

Closing Plate

The aluminum plate has a V-shaped notch and is used to simplify the closing of the reserve container. The packer kneels on the plate and can easily insert the pin. The plate distributes the pressure evenly and protects flaps and grommets of the reserve container. 400g (30cm x 10cm x 5mm)

€41.36
Quick view

Closing Plate - 4"

Closing Plate - 4"

This tool is a 4" closing plate. It is very useful on most modern rigs where you want to sink the pilot chute or a flap down between the ears of the molar bag.

€34.42
Quick view

Pro Packing Hook

Pro Packing Hook

This steel hook is designed to make PRO packing any square parachute easier and less fatiguing. It does the heavy lifting while you do the folding. A must for any professional packer as well as those packing tandems and square cargo canopies.

€17.96
Quick view

Packing Hook

Packing Hook

A tool used to stow lines in retainer loops of T-10, MCI-1, NB-6,-7,-8 parachutes.

€38.03
Quick view

Spanners - kit 6,7,8,9,10,11,12mm

Spanners - kit 6,7,8,9,10,11,12mm

6x6mm, 7x7mm, 8x8mm, 9x9mm, 10x11mm, 11x11mm, 12x12mm.

€33.33
Quick view

FABRIC TESTING CLAMP AND SCALE KIT

FABRIC TESTING CLAMP AND SCALE KIT

This set of tools is used to perform Parachute Industry Association TS-108 Fabric Strength Test. Replaces the old "rigger thumb test". Comes with two fabric clamps, one 50 lb. Scale, one 1-oz. bottle of Bromocresol Green Solution and instructions. The only way to tell if a canopys fabric is strong enough!

€247.24
Quick view

Aluminum packing stick

Aluminum packing stick

Standard equipment for every packer. Length app. 30cm.

€26.27
Quick view

ChutingStar Rigger Closing

ChutingStar Rigger Closing

ChutingStar Rigger Closing H 1/4" Thick Matte Black Aluminium

€45.13
Showing 1 - 52 of 52 items