Is used to make closing loops. Colour: white Per meter or roll of approx. 100 yards. Type W9680...

An extremely useful packing tool. The Packboy replaces the usual pull up cord and is the ideal help for easy and comfortable closing of the main container. The cutting into the hands by the pull up cord is over! The necessary pull force is significantly reduced....

Standard equipment for every packer. Length app. 15 in....

Every rigger should own this kit. It contains all important parts needed to pack reserve containers equipped with Cypres loops. The used loop material can not only be used for Cypres equipped rigs, but is suitable outstandingly for closing all reserve containers, because the necessary pull force at the Ripcord handle is reduced by up to 50% and the risk of a broken loop is decreased substantially....

A must for all jumpers and riggers. Beeswax is normally worked into control lines where they rub together to keep them from burning. Also used in sewing to treat thread for easier sewing and less slippage....

Is used to make Cypres loops and running-loops. 50 meter spool. Cypres loops must be changed with every reserve repack....

Aligator hemostat 3,5"...

Ideal instruments for compressing material, pulling threads and getting into very tight spots. Built in locking mechanism. Stainless steel....

For fast but careful removal of seams. Is part of the basic equipment of riggers....

Binding tape for many uses. Generally used making parachute containers, bags and covers and pull-up cord. Tensile strength 400 lbs. Roll of approx. 72 yards. Type W9830...

For the quick fix of small holes in Parachute fabric. Ripstop Tape with self adhesive tape....

For the quick fix of small holes in Parachute fabric. Roll of 25 feet (7,6m) self adhesive tape....

Small handy scissors especially for rigging jobs. A built in spring reopens the scissors after every cut....

The T-Bodkins expert version consists of 3 threaded parts. The bodkin can be extended from 10 to 30 inches with an intermediate rod and this way can also be used for jobs through the reserve pilot-chute to the loop. It is made from high quality steel as well....

Especially useful and indispensable reserve packing tool for closing the reserve container. The T-Bodkin (also called T-bar) is made from high quality steel and consists of two components: T-handle and bodkin. Overall length is 8 inches. For some containers 2 bodkins are necessary....

This closing aid is a substantial relief for the reserve packer. The device reduces significantly the pull force to close the container, thus packing small and tight containers becomes a one man job. By simply turning the loop is pulled through the grommets till the pin can be inserted....

The Rigger's new best friend, and most versatile closing device available. This device can help shorten the time to close a reserve container over the traditional type of positive leverage closing device. This is a variation on the Positive Leverage Closing Device or T-Bar. This positive leverage closing device is machined from a 1" bar of aluminum and is 12" long. It has the unique feature of a s...

This closing aid is a substantial relief for the reserve packer. The device reduces significantly the pull force to close the container, thus packing small and tight containers becomes a one man job. By simply turning the loop is pulled through the grommets till the pin can be inserted....

Indispensable to make finger traps in suspension lines. The set contains 3 different sizes....

These fids are made from stainless steel. Each fid is about 3 1/4" long and the set has one 2.25mm in diameter, one 3.5mm in diameter, and one 4.5mm in diameter fid. One of these fids will finger trap any of the hollow braided suspension lines currently on the market....

Special finger trapping fid for Cypres loop material and indispensable for every rigger. Is used to make Cypres closing loops....

15 assorted needles for different uses....

A leather tool used to hand-sew harness and other heavy material. Right hand....

Can be co-ordered by riggers or packers....

Used for temporarily hold pack closed prior to inserting of actual ripcord. Extra long cable length with warning flag installed....

Cable Cutter * for medium hard wire up to 6 mmdia., e.g. Bowden cords, but also for cables and steel rods * with opening spring and locking lever * cutting edges additionally induction hardened * special blade geometry prevents the wire rope fanning out...

So the canopy gets into the freebag the way it should come out. Every rigger needs this important and very popular packing aid to ensure the shape of the laid down pack job stays the same while inserting into the freebag....

Used to control thickness of free bag between upper and lower grommets of one-pin reserves....

Fabricated of steel and cadmium plated. Built to accept rapid links without turning them 90 degrees....

By inserting the hook in the size 0 grommet of the reserve container, and the ripcord cable in the slot of the pull check tool, you can check the pull force of the reserve ripcord without opening the container. This device does not work on the top pin of some pilot rigs where the angle of the pull is extreme....

The aluminum plate has a V-shaped notch and is used to simplify the closing of the reserve container. The packer kneels on the plate and can easily insert the pin. The plate distributes the pressure evenly and protects flaps and grommets of the reserve container....

Used to hold lines in proper position while pleating canopy....

Yellow Three Ring Release Cable. Price for 1 meter....

Black coated ripcord cable. Price for 1 meter....

PLASTIC HANDLE ONLY...

Coupler for Ripcord...

Coupler for Ripcord...

Pressing Tool...

Waxed cord with a tensile strength of 80-90 lbs. Colour: black Type: T1050 Super Tack Cord Roll of 250 yards...

The thread for most rigging jobs. Is used for repairs of containers and fabrics. Tensile strength 8.5 lbs Type: T1012 Roll of 8 oz...

This thread is used for rigging jobs on harnesses and heavy harness materials. Tensile strength 40 lbs Type T1028 Roll of 8 oz...

Packing data cards to record and prove reserve repacks. The design is conform with PIA (Parachute Industry Association) recommendations. Set of 50 made from rip resistant Tyvek paper....

Important accessory for all packers and riggers. Necessary to press seals on safety threads after the finished reserve pack job. Sturdy and durable pliers for the common lead seals. Made in Germany. Length: 11cm...