Currency: [€] [zł]
-- price: lowest first price: highest first name: A to Z name: Z to A in-stock first sort by
The Mirage G3 is the rig of choice for many very experienced skydivers, but it is also an excellent choice for a first rig. The rig satisfies all requirements for modern design, safety and advanced technology. Skydivers who want everything from their rig prefer the Mirage. During extreme flight maneuvers and in all speed ranges the risers, pins and
As opposed to the conventional F-111 canopies the Silhouette excels with its better agility and ease of operation. Through its blended fabric construction (top skin zero-porosity-fabric / bottom skin F-111) it is easy to pack and has a longer life span than a pure F-111 parachute.
The Spectre is a new developed high performance 7-cell with a broad performance spectrum. In deep brakes it flies -even with slow forward speed- very stable and controlled and has therefore all the docile characteristics of the 7-cell family. With higher forward speeds it has the characteristics of a modern 9-cell, a flat glide angle, fast turns
Since its introduction this canopy has become the most popular in its class. The Stiletto is a high performance elliptical canopy only for experienced jumpers. It got superb and stable flight characteristics. Its advantages are soft openings, flat glide path, extreme high forward speed, very fast turns and unbelievable landing abilities.
R.A.G.E. The Hi End Wing for experienced skydivers. With the R.A.G.E., the Paratec engineers have created a new generation Ram Air Wing in the literal way. Not only they have achieved an aircraft like nose, but also stabilized the pressure point and managed to control the air spill on the nose.
The Omega is a slight elliptical 7-cell zero-porosity canopy and was newly developed by Icarus, because the demand for this segment of canopy type has strongly increased in the recent years. It was drafted as all around canopy, which can be flown stress free, makes a lot of fun and only has a small pack volume. The flight characteristics are
With the Icarus EXTreme VX the joint venture Precision Aerodynamics and New Zealand Aerosports has reached a leading position in the segment of ultra high performance canopies, other manufacturers had to react to with own products. The new answer from Icarus Canopies is the Extreme VX, an elliptical 27-cell incorporating the new “X-braced
The Student Next...The best from the very beginning
Specially constructed for canopy-swooping our swoop-pants protects knees and buttocks during pretentious landings. The knees are made from parapack with a foam as padding. The seat area is also made from parapack and has removable foam-protectors. With the leg zippers you can tighten up the lower leg area for reduced drag. The pants are tailor-made
The Sabre is the most sold zero-porosity canopy on the market and very often the standard parachute at many drop zones. It is designed for advanced and experienced jumpers.
If you are serious about C.R.W., then there really is only one choice, the P.D. Lightning. The Lightning is not just a "regular canopy with C.R.W. lines", it is a specific canopy for a specific job...canopy relative work. C.R.W. requirements are unique. The Lightning is designed and built to satisfy those requirements.
An affordable and reliable quick release system designed to be installed on open face helmets with a camera installed or other devices that can create entanglement with lines at opening. Supplied as complete kit, can be installed on almost any open face helmet.
Adjustable Main Lift Web and/or Adjustable Laterals are included in the base price of the Student Wings. And the RSL is also standard on the student rig. There is also no extra charge for custom colors on a Student Wings, except for midflap stripes and midflap pinstripes.
The Wings is the result we got from 15 years of industry experience and with extensive research. Recent years have brought about new developments in harness/container design, but have also created new challenges. Wings was designed to accommodate all the demands of new age skydivers while maintaining the traditional needs of safety, comfort, and
We offer replacement lenses for BH Havok Helmet.
We offer replacement lenses for BH Mamba Helmet.
The Padlock release plate boasts the ability to quickly remove the camera, face the camera backwards or infinitely angle the camera angles +/- 10 degrees. This solutions allows the helmet configuration to suit all of the camera flying disciplines
The robust and proven 7 cell reserve is made by Performance Design, the leading manufacturer of sports parachutes. PD reserves have their own design with specifications which are specially tuned to reserve canopies. The L-beam construction makes the canopy in regard to maximum suspended weight and speed limit more endurable as it actually would
The new Smart from Aerodyne is the state of the art in reserve canopies. Strength, reliability, and performance manufactured to the world’s highest standards. All of this technology and quality is available with a small pack volume, and is compatible with all modern harness/container systems.
The SPEED 2000 is a last generation reserve. Once more it closes in onto the flight and landing characteristics of a 7 cell reserve to the 9 cell main canopies. Utilising the innovative “True-Shape” technology and most modern materials it occupies a top position in pack volume, unafraid of any comparison.
Step into the NeXt Century
A symbol for a new age in student, harness container evolution. That was our goal while developing the Icon Student. Student training is becoming more diverse, and the demands placed upon student equipment have become greater.
Important accessory for all packers and riggers. Necessary to press seals on safety threads after the finished reserve pack job. Sturdy and durable pliers for the common lead seals. Made in Germany. Length: 11cm
"The realm of parachute accuracy is one of the oldest and largest skydiving disciplines in the world. Most of the jumpers in this part of our sport are still jumping designs that were created more than 30 years ago, none of which are Performance Designs products. About three years ago PD began pursuing a new challenge; the traditional accuracy
If you are serious about C.R.W., then there really is only one choice, the P.D. Lightning. The Lightning is not just a "regular canopy with C.R.W. lines", it is a specific canopy for a specific job...canopy relative work. C.R.W. requirements are unique.
With great openings and a powerful flare at landing, this truly is the 7-cell that thinks it’s a 9-cell. Looking for a reliable canopy that will keep you challenged? Have you been searching for the perfect wingsuit canopy? Considering trying CF one day but not ready to buy a second canopy? Well here you go.
A leather tool used to hand-sew harness and other heavy material. Right hand.
The FLAT-TOP NARROW is a great all-around camera helmet for any discipline in skydiving. RW, freefly, tandem video or competition freestyle can be captured with your FLAT-TOP NARROW. This camera helmet is a rear-entry system to give the user better camera stability without sacrificing comfort. This NARROW version of the FLAT-TOP PRO has been
The FLAT-TOP PRO from Bonehead composites is flown by some of the top names in skydiving aerial photography. Norman Kent, Joe Jennings, and Michael McGowan all rely on their FLAT-TOP PRO camera helmets for their versatility, ability to mount multiple cameras and accessories as well as perfect stability and balance of weight. The FLAT-TOP PRO
The OPTIK ILLUSION is the latest addition to the BoneHead family of camera helmets. We have taken the proven stability and design of the original OPTIK and made it even more versatile with its larger top mounting surface area, redesigned left side camera mounting space and a cleaner, more refined internal audible cavity.
The New TonFly setup for the night jumps "MILO HELMET" One set of two super bright leads, fully integrated into a box that can be top Zkulls connected on the top platform of the helmet. Box with red and bright white light can be used on any Tonfly helmets with Zkulls connection. The red light does not interfere with night vision and is used on
This is the ideal helmet for the Professional Videomen. Its double TM Zkulls solution allows you a multitude of Photo-Video different connections, succeeding to satisfy any kind of Videomen requirement. - Helmet in carbon fibre technology - One piece Chincup with tunnel for the ratchet straps - Two flat reinforced sections left side and top - Two
The most important component for the activation of your reserve parachute. The original CYPRES Cutter has proven itself already 100,000 fold in all types of containers. It is the ultimate tool to initiate the opening of your reserve parachute if you are unable to. The force of the cutter is strong enough to cut a steel cable. An electronic pulse of
Changing according to the current trends in 3D freeflying, the new Stream contains innovative solutions and fabrics, making it original and with a distinctive look.
Canopy Surface: 36 m2 / 387 sqft
Canopy Surface: 44 m2 / 473 sqft
Our new Camera Cage design allows the CX110-150 user access to camera features whist providing roll cage type protection.
Z1 HP Spare Padding.
Four years after the introduction of the innovative G3 container, Mirage Systems introduced the latest generation of skydiving technology, the Mirage G4. The new G4 includes major advances in comfort, safety, ease of use, aerodynamics, fit and rigger-friendliness.
Used for the connection between suspension lines and risers in reserve and main canopies. Safe tensile strength 480 lbs. 4 connector links per rig are needed.
Gold necklace - white gold
All SIGMA Tandem Systems come standard with: Adjustable Student Harness, Main Bag,
The specially designed camera mount allows the most popular cameras to be installed on the Z1 helmets.
Specially constructed for canopy-swooping the swoop pants protects knees and buttocks during these pretentious landings. The knees are made from parapack with a 10 mm foam as padding. The seat area is also made from parapack and has removable foam-protectors. With the legzippers you can tighten up the lower leg area for reduced drag. The swoop
The ICARUS Reserve complements the world renowned ICARUS main canopies like the SAFIRE 2, the CROSSFIRE 2, the OMEGA, the OMNI, the ICARUS Tandem, the EXTREME FX, the EXTREME VX offering a complete canopy solution for every modern skydiver and canopy pilot.
The EXTreme-FX is not for everybody. It's built specifically for radical maneuverability and is ideal for turf surfing. It is for experienced elliptical pilots only. The ICARUS EXTreme-FX delivers even smoother openings, an even stronger flare, and packs up slightly smaller than the EXTreme. Most importantly, the EXTreme-FX will now give you
The Icarus Omni is the latest innovation in 7 cell canopy design. 7 cell canopies gained popularity because of their ease of use and gentle characteristics. The disadvantage with 7 cells is their reduced lift and inferior flare characteristics when compared with many 9 cell designs. While this is no issue for beginners or at lighter wing loadings
Aligator hemostat 3,5"
The ultimate performance from PD. The Velocity is part of a new series of ultra-high performance canopies and is suitable only for very experienced jumpers, which have flown small elliptics for a while and are confident to be able to handle this awesome performance. Its structure with cross braces and the almost closed leading edge give this canopy
Soft Links PD (Slinks) Typ SR-1 Reserve
Cypres - maintenance
PD T-shirt. 100% of naturally cotton. High quality, soft and robust material.
A symbol for a new agein harness container evolution.
The Katana is a high-performance canopy designed for experienced canopy pilots. The Katana has been described as “a perfect fit between the Stiletto and Velocity,” and a canopy that is “very suited to modern flying styles.”
The new EVA headband provides additional forehead protection and combines with Gaths unique comfort strip fitting system to provide a superior customised, comfortable fit.
Nearly ten years in research and development make the Sensei Project the longest test-piloting program of any ram-air canopy in history. Now Aerodyne Research has teamed with master designer Brian Germain to bring this elegant canopy design to the marketplace.
The RaptorX suit is the new enhanced high-end jumpsuit for all ambitious RW skydivers. It is designed especially to suit the special requirements of competition oriented FS teams.
A new design to the Wings container. We have made the # 2 (the main closing flap/risers covers with a new look. Instead of it just being one piece, it's now 2 seperate pieces. You can choose to have it one color or 2 colors.
Used for the connection between suspension lines and risers in reserve and main canopies. Safe tensile strength 615 lbs. 4 connector links per rig are needed.
CYPRES by Airtec is the first microprocessor controlled automatic activation device and meets all needs and wishes of today´s skydivers. The performance is great and the operation is quite simple. Just switch it on in the morning prior to the first jump, then forget it. Cypres will calibrate to ground elevation by measuring the air pressure
Paratec developes and manufactures Tandem Rigs since 1993. This has provided us with a vast experience in this field. The Next Tandem rig is compatible with a variety of other Tandem Reserves and Tandem Mains, next to our own.
The name Twin is there for a reason. As we started to develop our own Tandem canopies, we spent a lot of time defining their performance enevelope, based on the requirements of passenger and pilot.
In 2002 UPT decided that an upgrade to the then Vector 2 student rig was required. We had already stopped production of the Vector 2 sport system, but we had continued to produce the Vector 2 student system as a low cost alternative to DZO’s, but we saw to keep up with the times and the latest technology of the day.
Based on the outstanding design of the Vector 3, the V3 Micron container was designed aimed towards the growing trend of smaller canopies. The V3 Micron improves the function of the riser covers, pin protection, comfort and the operation of the three-ring release system. The container is shorter and narrower than the Vector III container.
The V3 M-Series utilizes V3 Micron technology to improve function, safety and comfort and is designed to accommodate larger canopy sizes to that of the V3 Micron.
Fabricated of steel and cadmium plated. Built to accept rapid links without turning them 90 degrees.
From openings to landings: Stress-Free Fun
The Rigger's new best friend, and most versatile closing device available. This device can help shorten the time to close a reserve container over the traditional type of positive leverage closing device. This is a variation on the Positive Leverage Closing Device or T-Bar. This positive leverage closing device is machined from a 1" bar of
Ideal instruments for compressing material, pulling threads and getting into very tight spots. Built in locking mechanism. Stainless steel.
Twin Rescue Tandem Canopy
The A2 is an elliptical 9-cell canopy, built with a combination of zero-porosity and 0-3 cfm fabric. Its airfoil and moderate planform factor guarantee superb handling characteristics, to minimize the workload of tandem masters. Not only will they find the toggle pressure, turn response and flare power they have been seeking, but they will be
PLASTIC HANDLE ONLY
Specially developed for Vigil® (patented technology -EU Patent N° EP1512626A2). The cutter severs the reserve loop by a pyrotechnical cutting action with a circular knife. It will eventually melt the loop to ensure its separation due to high internal temperature. The cutter is completly confined to avoid any possible damage to the parachute.
This is Sky Systems newest camera mounting system. It is the only mount that gives you the ablity to quckly direct your camera in 4 directions.
Step ring
The Icarus Elliptical Tandem canopy is a totally Zero-P, Truly Elliptical canopy (leading edge and trailing edge) The only straight cell is the centre cell. The cells vary in width to control cell deformation over the span of the canopy. There are no brake settings and the canopy opens on full drive. It is available in 3 standard control line
From the inventors of the patented crossbraced canopy, once again we’re raising the bar in high performance canopy piloting. We’ve come a long way since the Excalibur of 1989 to bring you the Competition Velocity. This time we’ve designed a canopy purely for the competitive swooper.
Go Fast shirt. 100% of naturally cotton. High quality, soft and robust material.
The free-fly jacket is the perfect complement to the Freefly pants. Both pieces become a unit when worn together, or can of course, be worn separately. It is made with durable polycotton and an approx. 16 cm wide elastic waistband, ensures a secure fit. It is finished with long lasting Velcro closures on the arms, a two piece front zipper and an
Small handy scissors especially for rigging jobs. A built in spring reopens the scissors after every cut.
When you wear it, the first feeling is to have a suit really tight and comfortable. The UNO.618 Suit allows you to move freely even if you feel it tight It's a different kind of fit - FANTASTIC Built with high quality fabrics such as Schoeller elastic, DuPont Cordura and rip-stop
The aluminum plate has a V-shaped notch and is used to simplify the closing of the reserve container. The packer kneels on the plate and can easily insert the pin. The plate distributes the pressure evenly and protects flaps and grommets of the reserve container. 400g (30cm x 10cm x 5mm)
This closing aid is a substantial relief for the reserve packer. The device reduces significantly the pull force to close the container, thus packing small and tight containers becomes a one man job. By simply turning the loop is pulled through the grommets till the pin can be inserted.
Especially useful and indispensable reserve packing tool for closing the reserve container. The T-Bodkin (also called T-bar) is made from high quality steel and consists of two components: T-handle and bodkin. Overall length is 8 inches. For some containers 2 bodkins are necessary.
The T-Bodkins expert version consists of 3 threaded parts. The bodkin can be extended from 10 to 30 inches with an intermediate rod and this way can also be used for jobs through the reserve pilot-chute to the loop. It is made from high quality steel as well.
Binding tape for many uses. Generally used making parachute containers, bags and covers and pull-up cord. Tensile strength 400 lbs. Roll of approx. 72 yards. Type W9830
Allows to connect your PC via USB port. Logbook software with demo version included.
The ELEMENT resembles Paratec‘s interpretation of a modern student canopy to meet the demands of todays advanced student training programmes and instructors alike. The ELEMENT comes in sizes 220, 240 and 260 sqft to succeed the Balance which has earned an impressive reputation for it‘s reliability since it‘s introduction in 1996.
For fast but careful removal of seams. Is part of the basic equipment of riggers.
UNO.618 S " Same features of UNO.618 but with short sleeves Built with high quality fabrics such as Schoeller elastic, DuPont Cordura and rip-stop speed materials The wind repellent elastic parts are interconnected to allow maximum freedom of movement
The thread for most rigging jobs. Is used for repairs of containers and fabrics. Tensile strength 8.5 lbs Type: T1012 Roll of 8 oz
items: 10 20 50 100
No products
Shipping €0.00 Total €0.00
Cart Check out
All specials
All new products
Is used to make closing loops. Colour: white ...
Revolutiona- ry in Design and Function. Brain ...
The OPTIK from Bonehead Composites features ...
All best sellers