Currency: [€] [zł]
-- price: lowest first price: highest first name: A to Z name: Z to A in-stock first sort by
Handoperated tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic fabric, such as cords, ropes, bands and belting fabric. Heat up time of blades approx 6-8 seconds. Heat may be controlled by switching tool on and off.
Rigger bag. Measurements: 35x45x15cm.
This hot forged bent trimmer is an excellent, multi-purpose tool with great strength and durability. Offset handles allow blades to "hug" the work surface. Made of carbon steel, thru-hardened and fully double-plated with chrome over nickel. Perfect for drapery, canvas, fabric, upholstery, rubber, vinyl, plastics, leather and more.
Small handy scissors especially for rigging jobs. A built in spring reopens the scissors after every cut.
Wire Rope Shears forged head polished, handles with non-slip plastic coating
Important accessory for all packers and riggers. Necessary to press seals on safety threads after the finished reserve pack job. Sturdy and durable pliers for the common lead seals. Made in Germany. Length: 11cm
Ideal instruments for compressing material, pulling threads and getting into very tight spots. Built in locking mechanism. Stainless steel.
Aligator hemostat 3,5"
Pressing Tool
Coupler for Ripcord
Used to hold lines in proper position while pleating canopy.
These fids are made from stainless steel. Each fid is about 3 1/4" long and the set has one 2.25mm in diameter, one 3.5mm in diameter, and one 4.5mm in diameter fid. One of these fids will finger trap any of the hollow braided suspension lines currently on the market.
Special finger trapping fid for Cypres loop material and indispensable for every rigger. Is used to make Cypres closing loops.
Indispensable to make finger traps in suspension lines. The set contains 3 different sizes.
15 assorted needles for different uses.
A leather tool used to hand-sew harness and other heavy material. Right hand.
For fast but careful removal of seams. Is part of the basic equipment of riggers.
An extremely useful packing tool. The Packboy replaces the usual pull up cord and is the ideal help for easy and comfortable closing of the main container. The cutting into the hands by the pull up cord is over! The necessary pull force is significantly reduced.
A must for all jumpers and riggers. Beeswax is normally worked into control lines where they rub together to keep them from burning. Also used in sewing to treat thread for easier sewing and less slippage.
The T-Bodkins expert version consists of 3 threaded parts. The bodkin can be extended from 10 to 30 inches with an intermediate rod and this way can also be used for jobs through the reserve pilot-chute to the loop. It is made from high quality steel as well.
Especially useful and indispensable reserve packing tool for closing the reserve container. The T-Bodkin (also called T-bar) is made from high quality steel and consists of two components: T-handle and bodkin. Overall length is 8 inches. For some containers 2 bodkins are necessary.
This closing aid is a substantial relief for the reserve packer. The device reduces significantly the pull force to close the container, thus packing small and tight containers becomes a one man job. By simply turning the loop is pulled through the grommets till the pin can be inserted.
The Rigger's new best friend, and most versatile closing device available. This device can help shorten the time to close a reserve container over the traditional type of positive leverage closing device. This is a variation on the Positive Leverage Closing Device or T-Bar. This positive leverage closing device is machined from a 1" bar of
Used for temporarily hold pack closed prior to inserting of actual ripcord. Extra long cable length with warning flag installed.
Can be co-ordered by riggers or packers.
Every rigger should own this kit. It contains all important parts needed to pack reserve containers equipped with Cypres loops. The used loop material can not only be used for Cypres equipped rigs, but is suitable outstandingly for closing all reserve containers, because the necessary pull force at the Ripcord handle is reduced by up to 50% and the
Used to control thickness of free bag between upper and lower grommets of one-pin reserves.
So the canopy gets into the freebag the way it should come out. Every rigger needs this important and very popular packing aid to ensure the shape of the laid down pack job stays the same while inserting into the freebag.
Fabricated of steel and cadmium plated. Built to accept rapid links without turning them 90 degrees.
By inserting the hook in the size 0 grommet of the reserve container, and the ripcord cable in the slot of the pull check tool, you can check the pull force of the reserve ripcord without opening the container. This device does not work on the top pin of some pilot rigs where the angle of the pull is extreme.
Standard equipment for every packer. Length app. 15 in.
The aluminum plate has a V-shaped notch and is used to simplify the closing of the reserve container. The packer kneels on the plate and can easily insert the pin. The plate distributes the pressure evenly and protects flaps and grommets of the reserve container. 400g (30cm x 10cm x 5mm)
This tool is a 4" closing plate. It is very useful on most modern rigs where you want to sink the pilot chute or a flap down between the ears of the molar bag.
This steel hook is designed to make PRO packing any square parachute easier and less fatiguing. It does the heavy lifting while you do the folding. A must for any professional packer as well as those packing tandems and square cargo canopies.
Metal Ruler - 15cm / 6in. Stainless steel .
Metal Ruler - 30cm / 12in. Hardened steel
Small scissors V
Plastic Utility Knife. 15cm
A tool used to stow lines in retainer loops of T-10, MCI-1, NB-6,-7,-8 parachutes.
Nippers straight
Adjustable Wrench 10cm - 1-13mm
Spinner: 8x9mm
6x6mm, 7x7mm, 8x8mm, 9x9mm, 10x11mm, 11x11mm, 12x12mm.
Spinner: 10x11mm
items: 10 20 50
No products
Shipping €0.00 Total €0.00
Cart Check out
All specials
All new products
The MAMBA from Bonehead Composites is a great ...
The new EVA headband provides additional ...
All best sellers